We have been supplying increasing numbers of boardroom and meeting room tables that have services supplied to the table top. This has either been as an addition to a new table or in some cases we have attended site to work on existing tables. Clearly we prefer the former however some tables are of a bespoke design and constructive from selected wood veneers and would therefore be expensive to replace. The most popular means of providing IT services is the Affinity through desk solution which essentially consists of a rectangular box with a spring operated flip top lid. Power, data, and voice requirements can be tailored to suit and the units are supplied as standard with a 3m lead and 13amp plug as standard. The Horizon module is a similar design but the top lifts clear to allow access from both sides. Standard configurations for the Affinity or Horizon units are 2-3 days, customised versions normally take 2-3 weeks

Open boardroom tables
These tables are available on a 2-3 week lead time from our manufacturing partners in Northern Italy. Tops are 30mm thick Maple, Bubinga which is similar to Mahogany and Italian walnut. The tables are supported by a contemporary open square  metal frame consisting of 54m x 54mnm aluminium plate finished in silver epc finish. The modular design of the tables prices a double D end and trapezoidal end configuration with a central channel for cable management and passage of cables. The use of rectangular extensional tables allows the formation of boardroom tables of unlimited length. These tables comply with EU standards for office furniture and environmental standards
Pleas contact our sales department for further information

Driven by the requirement for flexible multipurpose meeting rooms and spaces, there are a number of meeting table arrangements to suit these applications and budgets.
Simple modular tables with 60mm diameter metal legs are possibly the most cost effective solution. A simple turn will secure the leg to the spigot and legs and tables can be stored very efficiently when not in use. Foldaway tables have the advantage of leaving the legs attached to the table which can be locked into position when in use or when stored away. This type of table can also be stored very efficiently. Both ranges can be used with table trolleys. The Harley Axis folding table has a higher specification and this four legged approach gives more stability than the foldaway table. Harley axis is available in 25m MFC finishes and 38mm veneer finishes and is often sold as a boardroom table. Harley Axis is has its own trolley for easy storage. Finally there are a number of flip top tables available. Flip top tables are easy to move and to store away and are ideal in situations where the room is frequently reconfigured, however they take up more space when stored away with the top down
Please contact us for further information on our range of meeting tables.

Nimbus boardroom tables are available in a selection of exclusive veneers. The finishes available include Cherry, Natural walnut, Kevisinga, Stormy Oak, Pippy Oak or Birds Eye Maple. Tops are 40m thick with a bullnose edge as standard. Table tops can also be provided with contrasting edges and inlays to give a truly exclusive look. There are 5 leg options from a simple 60mm wooden tubular leg to a pedestal base with contracting silver or copper plinths. Standard table top shapes are rectangular, circular, boat shaped and double D end. We are happy to quote for any special size and shape in this range. Our cable mangement options can also be used with these tables Manufactured in the UK these tables are normally on a 4-6 week lead time
Please contact us for further information on Nimbus boardroom tables

Reunion meeting tables
Meeting and conference tables available in 12 top finishes. This table programme is available in three formats. The modular table range comes with 60mm diameter pole legs and include a linking device to hold the tables together. Table top shapes are rectangular, trapezoidal, radiused segement, quadrant and half moon. The range of table shaped allows a number of configurations to be created to suit large conference and training room applications. The range also includes a table top trolley and a leg storage trolley making these tables ideal for temporary use. Reunion tables are also available in flip top and folding versions with the same range for top finish options. these tables are normally available on a 10 day lead time. They are manufactured in accordance with UK standards for commercial office furniture

Elliptical boardroom tables held in stock for a 5-10 day delivery lead time. These tables are available in 25mm thick Wenge, Beech, Cherry and Maple finish. The standard table measures 2400mm in length and 1600mm in width. The top is in two pieces with a shaped central outlet to provide access for cable management. An extension table is available to allow tables of increasing length to be created by positioning the central extension between the two outer tables. A structural wooden element positioned underneath the table gives it rigidity. There is also circular and barrel shaped table available with this range. This is a very economical table with the standard model at £294.00 at the time of writing
Please contact us for further information on  Elancia boardroom tables

Tulip Boardroom furniture
Boardroom tables and storage units available in 12 colour options including Santiago Cherry, Oak. Beech, Canadian Maple, White, Japanese Ash, Silver and Light Grey.
Metal circular bases are finished in epc silver and positioned centrally under the table surface. Table top shapes are rectangular, boat shaped, elliptical and D ended. These boardroom tables are available for delivery in 10 days from order. Complementary storage from the Reunion range includes credenzas and cupboards with optional lighting options and available in the same 12 colour combinations. Our range through top cable management options can be applied to this range of boardroom tables
Please contact us for further information
Jon Office furniture sales

Avalon  conference tables
Available in 11 wood finishes, Havana, Apple, Beech, Black Ash, Cherry, Light Grey, Maple, Mocha, Swiss Pear and Walnut. Table and desk tops are 25mm thick.
60mm diameter metal legs are available in Chrome, Silver or Light r Grey. The legs also have rotating disc levellers for use on uneven floors or where incremental height adjustment is required. Conference tables are provided in rectangular, circular and trapezoidal options. Standard edges are straight 2mm radius however there is also an optional bull nose edge option in a range of contrasting pvc colours. Arrow head bases provide a further option is this meeting table is required as a boardroom table. We also provide these tables in flip top or fold down use which is very popular in training room applications. Normal lead time for these meeting room table is 7-10 days from order
Please contact us for further information
Rod office furniture sales

Travido meeting room tables
Travido is a flip top table system suitable for conference and boardroom environments where the tables are required for use at short notice or where the frequency of reconfiguration is quite high. Tops are provided in 25mm Maple, Beech, White or Wenge and the extruded aluminium frame is also offered in a white or silver finish. The tables can be given more of a boardroom look with the black frame and polished foot option for a small uplift in price. Rectangular desks and tables are available in two width 800mm and 670mm. There is a boat sped meeting table and half moon tables also with flip tops to provide a greater degree of modular options. Triangular link tops can be used to produce square and rectangular combinations and there is also an inexpensive table to table connection device if the configurations are more permanent
Normal lead times for these tables is 3-4 weeks from order
Please contact our sales office for further information on Travido office tables

Corniche boardroom tables are high quality real wood veneer tables with 40mm thick tops and solid wood lipping. Standard veneers are Oak, Cherry, Maple, Walnut or Rosewood. The edges are bull nosed as standard. The bases are matching wood in arrowhead style. These tables are available as a 1220m circular and Double D ended 2500mm, 3000m and 4000mm long. Normal lead time for these boardroom tables is 3-4 weeks from order. Our advertised prices for this table includes installation of the table and removal of packaging, your boardroom table is delivered ready to use These tables are manufactured in Buckinghamshire and comply with UK regulations for the construction of office furniture.

Please do not hesitate to contact us should you require further information on the Corniche range of boardroom tables
Jeff Office furniture installations